This article describes how to configure a FortiGate interface to manage FortiAPs. Based on the above topology, this example uses port16 as the interface used…
Category: Wireless
To configure SD-WAN in the CLI: Configure the wan1 and wan2 interfaces: config system interface edit "wan1" set alias to_ISP1 set mode dhcp set distance…
Azure ExpressRoute enables clients to establish secure connections between their on-premises infrastructure and Azure data centers. It offers a reliable and fast connection to Azure…
This is a sample configuration of ADVPN with BGP as the routing protocol. The following options must be enabled for this configuration: On the hub…
What is IPSEC? IPSec stands for "IP Security" and the standard definition of IPSEC is-- “A security protocol in the network layer will be developed…
There are three main types of Network Address Translation (NAT) that we can configure as per our requirement. They are Source NAT, Destination NAT and…
Here is an example configuration to setup up a dynamic site-to-site VPN with Juniper SRX and SSG. we will configure VPN using IPSec protocol which…
SD-WAN is a software-defined approach to managing the WAN by decoupling the control plane from the Data Plane. With SD-WAN, IT can deliver routing, threat…
In a typical Campus WLAN, the APs communicate with the Master controller (MC) in one of the two following modes: Tunnel forwarding modeDecrypt Tunnel Mode…
As per the industry best practices it is highly recommended that we always begin a wireless LAN deployment with a detailed site survey. The goal…